Product Info

perating Basics 2-15

Networking

Your Qbe incorporates the 10/100 Base-T LAN (Local Area Network)

capabilities to make it ready for connection to a network environment

using Ethernet protocol.

Connecting the Network Cable

1. Turn off the computer.

2. The RJ-45 connector at the rear of the PCT can be connected to a

type 1 STP or category 5 UTP cable.

graphic. Connecting the Network Cable

3. Turn on the computer.

Enabling/Disabling the LAN Connection

If your PCT is connected to LAN, there will be 5 to 20 seconds time lag

before Windows starts to work when resuming from suspend mode. The

time-delay is spent by Windows to check and “Wake up” all hardware

and re-connect the network when resuming from low power mode. If

you want to minimize the time lag, you can disable the LAN connection

since the LAN function can be disabled or enabled easily and

dynamically in Windows. The following description shows the

procedures for disabling or enabling LAN through Windows.

1. Click “Start”, “Setting”, and then “Control Panel”.

2. Double click the “System” icon.

3. Click “Device Manager”.