Operation Manual

Observe the following precautions when using the cables:

- Do not touch the plug and connector with wet hands. Otherwise, electric

shock may result causing death or severe injury.

- Hold the plug or connector when removing the cable.

- Pulling the cable or carrying by holding it may damage the cable, causing

fire or electric shock.

- Do not damage or remodel the cable.

- Do not place a heavy object on the cable or lay it under the flat panel

detector. Do not step on, pull, forcibly bend, or bundle the cable.

Otherwise, fire or electric shock may result.

- Do not use the flat panel detector for the

radiographic examination stand if its cable

becomes overloaded. Otherwise, the cable may

be damaged, causing fire or electric shock.

- Do not touch the back-up cable connector of

Yushan, otherwise it may result in electric shock

or malfunction of the equipment.

Do not use the equipment in a location where metal particles could come into

the equipment. This may cause an electric shock.

Do not disassemble or remodel the equipment. Otherwise, fire or electric

shock may result. Keep away from the parts inside the product, which may

cause electric shock. If you touch them accidentally, death or severe injury

may result.

Do not hit or drop the equipment or subject it to severe shock. Otherwise, the

equipment may be damaged. If the damaged equipment is used, fire or electric

shock may result.

Do not use the flat panel detector to lift up patient.

In addition, do not apply strong pressure onto the

flat panel detector. If applied, the flat panel detector

deforms and the waterproof function may be

invalid.

Have the patient take a fixed posture and do not let the patient touch parts

unnecessarily. If the patient touches connectors or switches, it may result in

electric shock or malfunction of the equipment.

Do not use the flat panel detector without the battery packs. If the battery