Operation Manual
© INNOLUX Corporaon │ X
Appendix B Electromagnetic
Compatibility
B.1 Yushan FPD
This equipment has been tested and found to comply with the limits for medical
devices to the IEC 60601
These limits are designed to provide reasonable protection against harmful
interference in a typical
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to other devices in the vicinity.
However, there is no guarantee
installation.
If this equipment does cause harmful interference to other devices, which can
be determined by tuning the equipment off and on, the user is encouraged to
try to correct the interference by one
-
Reorient or relocate the receiving device.
-
Increase the separation between the equipment.
-
Connect the equipment into an outlet on a circuit different from that to
which the other device(s) are connected.
If the problem ca
nnot be solved with the above measures, stop using this
equipment and consult the manufacturer, our official dealer or INNOLUX
Representative for help.
_____________________________________________________________
Warning
Do not place devices generating
If a device(s) other than those specified is connected, predetermined EMC
performance can not be guaranteed.
_____________________________________________________________
© INNOLUX Corporaon │ X
-Ray Products
Appendix B Electromagnetic
Compatibility
(EMC)
B.1 Yushan FPD
This equipment has been tested and found to comply with the limits for medical
devices to the IEC 60601
-1-2:2014/EN 60601-1-2:2015.
These limits are designed to provide reasonable protection against harmful
interference in a typical
medical installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to other devices in the vicinity.
However, there is no guarantee
that interference will not occur in a particular
If this equipment does cause harmful interference to other devices, which can
be determined by tuning the equipment off and on, the user is encouraged to
try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving device.
Increase the separation between the equipment.
Connect the equipment into an outlet on a circuit different from that to
which the other device(s) are connected.
nnot be solved with the above measures, stop using this
equipment and consult the manufacturer, our official dealer or INNOLUX
Representative for help.
_____________________________________________________________
Do not place devices generating
electromagnetic wave near this equipment.
If a device(s) other than those specified is connected, predetermined EMC
performance can not be guaranteed.
_____________________________________________________________
62
Appendix B Electromagnetic
This equipment has been tested and found to comply with the limits for medical
These limits are designed to provide reasonable protection against harmful
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
that interference will not occur in a particular
If this equipment does cause harmful interference to other devices, which can
be determined by tuning the equipment off and on, the user is encouraged to
or more of the following measures:
Connect the equipment into an outlet on a circuit different from that to
nnot be solved with the above measures, stop using this
equipment and consult the manufacturer, our official dealer or INNOLUX
_____________________________________________________________
electromagnetic wave near this equipment.
If a device(s) other than those specified is connected, predetermined EMC
_____________________________________________________________