Operation Manual

1.1 Product Introduction

INNOLUX Yushan X-Ray Flat Panel Detector is an X-ray image acquisition

device that is based on flat-panel. This device should be integrated with an

operating PC and an X-ray generator. It can do to utilize as digitalizing X-ray

images and transfer for radiography diagnostic. Each X ray photon will be

converted to electronic signal by scintillator and the sensor array. Electronic

signal in the pixel will be readout by driver IC and then become an image

before send to PC.

1.2 Product Series

Model Description

Yushan V14C Glass version 14”x 17” FPD with CsI

Yushan V14G Glass version 14”x 17” FPD with GOS

1.3 Product Intended Use

The Wireless/Wired INNOLUX Yushan X-Ray Flat Panel Detector is intended

to capture for display radiographic images of human anatomy. It is intended for

use in general projection radiographic applications including pediatric and

neonatal exams wherever conventional film/screen or CR systems may be

used. The INNOLUX Yushan X-Ray Flat Panel Detector is not intended for

mammography, fluoroscopy, tomography, and angiography applications.

INNOLUX Yushan series provide either raw X ray image or corrected image

for system integrator to do further image process.

1.4 Product Significant Performance

Characteristics

Items Characteristics

Image resolution 2500x3052

Data 16 bit data

MTF (Modulation transfer

function) (Typical)

CsI

0.69 @ 1 lp/mm

0.39 @ 2 lp/mm

0.22 @ 3 lp/mm

GOS

0.52 @ 1 lp/mm

0.23 @ 2 lp/mm