User Manual

PowerBASE™ Owners Manual 99300787-i
13
INSTALLATION
12. Install headboard brackets to the
bed base frame per the following
instructions:
Note: Headboard brackets are optional for
Type B beds. See accessory sheet for order
information.
a. Raise the head section of the bed
(with hand control) to gain access to
the bed base frame.
b. Determine bed base type (FIGURES
16 and 17). For bed base Type A,
proceed to Step “e”. For bed base
Type B, proceed to Step “c”.
FIGURE 18: Channel connector kit. (Used with adjustable
bed base Type B. See accessory sheet).
FIGURE 19: Channel connector mounting holes.
FIGURE 16: Adjustable bed base Type A.
FIGURE 17: Adjustable bed base Type B.
c. For bed base Type B, locate channel
connector kit (FIGURE 18). On one
side of bed base frame, locate
(2) holes for channel connector
mounting (FIGURE 19).
ADJUSTABLE
BED TYPE A
ADJUSTABLE
BED TYPE B
80” BASE
LENGTH
MOUNTING
HOLES
74” BASE
LENGTH
MOUNTING
HOLES
(2) CHANNEL
CONNECTOR
MOUNTING
HOLES