FLUID SUPPORT ASSEMBLY INSTRUCTIONS SETTING UP YOUR FLOTATION SLEEP SYSTEM 1. Unpack the Box Take all of the components out of the box.
legs rest upon the ground and you have the firm, flat side of the foundation is facing up. You are now ready to begin the bed assembly. all of the trapped air. Use the Air Extractor to remove the excess air. 10. Several of InnoMax’s® firmer water chambers feature a high level of fiber, closed cell and/or sponge support sheets. These layers need to become fully saturated with water to provide the desired comfort levels.
surface and not over the crack between foundation halves or plywood pieces in a platform. It is best to place the pad as far down the bed as possible to avoid constant pressure of sitting on the pad. Push the pad power cord through the slits in the black webbing and cover. The temperature sensor on the control can be pulled through from the outside.
