User's Manual

WI-FI BT ADD-ON-CARD
USER MANUAL
________________________________________________________________________________________________________________
Innominds Confidential Information
Page 6 of 15
4. Installation /Setup guide (using FX30 as an
example IOT host gateway)
Step 1: Open the cover plate of the FX30 module.
Step 2: Insert the WBAC card in the IoT slot as shown in figure1:
Figure 1: Module Insertion
Step 3: Close the cover plate as shown in figure 2. And put the screws.
Figure 2: Fixing Cover Plate
Step 4: Insert washer and nut to the WBAC SMA connector as shown in figure 3.