User's Manual

WI-FI BT ADD-ON-CARD
USER MANUAL
________________________________________________________________________________________________________________
Innominds Confidential Information
Page 8 of 15
Step 7: Open putty, set SSH mode, type 192.168.2.2 and port as 22 and
login. Next when putty console opens, type login as ‘root’ and leave the
password empty. Press enter.
5. Enabling Wi-Fi
5.1. Station/client mode:
After step 7 mentioned above,
 ./13
 ./42
To set the router name and password to which this device has to connect,
type :
 vi /etc/wpa_supplicant.conf
'a' for edit, 'esc' for coming out of editting mode and ':wq' for save and exit.
 ./wifi.sh client
 Ping the address of the detected router.
5.2. For AP/router Mode, type the following commands in putty:
After step 7 mentioned above,
 ./13
 ./42
 vi /etc/hostapd.conf
Here you need to set the channel number (1 or36), hw_mode (a or g). Also
type 'a' for edit, '/textname'for searching, 'n' for next, 'esc' for coming out
of editting mode and ':wq' for save and exit.
 ./wifi.sh ap
See the wifi ap as 'test' in your laptop. Connect to it from your laptop over
wifi and ping its address as 192.168.43.1.