User's Guide
Table Of Contents
- 1 Figures
- 2 Tables
- 3 Terms & Definitions
- 4 Introduction
- 5 INP301x Package Contents
- 6 Description of the board
- 7 Functional Description
- 8 Power Measurement
- 9 Using Battery as Power Source
- 10 Antenna
- 11 Power Supply
- 12 Talaria TWO Module Integration in End Products
- 13 FCC/ISED Regulatory Notices
- 14 Support
- 15 Disclaimers
User Guide for Talaria TWO Evaluation Board
Version 1.1 8 ©InnoPhase, Inc. 2020
6.4 IO Header (J1)
The J1 header brings out all the IOs from INP101x module. These IOs can be used for debug, and/or
any external interfacing needs. The pinout of this header is shown in Figure 5. To work with on
board sensor, pins 1 & 2 needs to be shorted.
Figure 5: IO Header