User's Manual

INNO-A20 User’s Guide INNOSTREAM Confidential
Template
Exceptionally, when editing a name in Connection Settings menu (URL Browser editing), you
cannot select T9 Language mode.
If you are in the T9 Abc mode, the [#] key is used to switch the letter entry mode. (
->
-> )
If you are in the Multi-tap mode, the [#] key is used to switch the letter entry mode. (
->
)
By pressing and holding [#] key in an input mode, Symbols mode can be also selected
with the exception of the case that you are in the numeric input mode.
By pressing and holding [*] key in an input mode, Numeric mode can be also selected.
By pressing and holding [NAVI-CENTRE] key in an input mode, Multi-tap mode can be also
selected.
7.2 T9 Abc input mode
Using the T9 Abc mode, you can enter words by successively pressing the key corresponding to
each letter in order to get the desired word. Although each key of the numeric keypad
represents several letters, only one key press per letter is required. The T9 Abc mode matches
your keystrokes to its Linguistic Database to determine which word the user intended to spell.
With each keystroke, the Word or Candidate Selection List is updated and the most likely
interpretation of the keystrokes is presented. In cases where more than one interpretation is
possible, T9 Abc mode presents interpretations in order of their frequency of use in the
language. In these case, the icon changes to and the user selects the desired word or
character from the interpretations by using [NAVI-UP] key or [NAVI-DOWN] key.
[Example Screen]
󰼿
󰼿 󰼿󰼿󰼿
[Key Function Table]
[Ok soft key]
accepts the string entered on the edit screen, and then turn to next
menu or screen.
[Clear soft key]
Short : clears a character of the string entered on the editing area
or clears a character on the active word(the word remain active).
Long : clears all characters
[NAVI-LEFT] accepts the active word and then moves the cursor to left direction by
PAGE : 28 of 98