User's Manual

INNO-P10 User’s Guide INNOSTREAM Confidential
PAGE : 14 of 95
Some SIM card may be protected with PIN.
If Enter PIN is prompted, enter your PIN and then press [Ok soft key].
For more details, please see Security Codes in section 3.
! Note: If your PIN is entered invalidly three times in succession, your SIM card is
blocked . In order to unblock it, see Security Codes in section 3.
If Enter Lock Code is prompted, enter your Lock Code and then press [Ok soft key].
The Lock Code is factory set to 0 0 0 0.
For more details, please see Security Codes in section 3.
After the phone is turned on, the phone searches for a network.
b) To switch your phone off, press and hold down [END] until you see the power-off
animation.
2.7 How to using Mass storage
Make sure that the USB cable is inserted.
Note:
① Delete and correction of the folder in Data Storage are prohibited.
② When a phone is plugged in a USB cable, all function of a phone do not operate it.
③ While copying files phone-to-PC, you cannot receive a call.
④ WIN98 Second Edition, WIN 2000, WIN XP
are supported only.
In case of copying many files at a time, it imposes a heavy burden on a Phone. We recommend you to copy files
within 5~6M byte at a time.
3. Security Codes
The security codes are used to protect your phone and SIM card from other person’ s use and
control access to security and other options within the menus.
You can change the security codes (except SIM Lock Code, PUK Code, PUK2 Code). For more
details, please see the Security Setting menu in section 9.
3.1 PIN
PIN is Personal Identification Number, used to safeguard your SIM card.
PIN code is composed of at least 4 to 8 digits, and usually provided with your SIM card.