User's Manual

INNO-P10 User’s Guide INNOSTREAM Confidential
PAGE : 53 of 95
! Note : To switch on the silence mode, press and hold [VOLUME-UP] on the left side of phone
in the idle screen. To switch off the mode, press and hold down [VOLUME-UP] again.
If your phone is in the silence mode, all audile key tones and melodies are prohibited and all
alerts are changed to the vibrator regardless of the setting in this menu.
<Profiles>
This menu allows you to activate and change the settings of the selected profile according to
your wish.
The audio profile menu allows you to access a group of pre-defined settings. A profile is a
group of audio settings that are set to suit a wide variety of events and environments (e.g.
meetings, movies, etc). There are seven types of profiles; Normal, Meeting, Outdoor, Car, Silent
and VIP profiles.
The table below shows the default settings of each profile.
Normal
Meeting Outdoor Car Silent VIP
Ring Type Melody Vibrator
Melody +
Vibrator
Melody Light
Melody +
Vibrator
Ring
Volume
Level 7 Level 0 Level 7 Level 7 Level 0 Level 7
SMS Alert
Type
Melody Vibrator Melody Melody Off Melody
SMS Alert
Volume
Level 5 Level 0 Level 7 Level 7 Level 0 Level 7
Key Tone
Volume
Level 5 Level 0 Level 7 Level 5 Level 0 Level 5
Game
Volume
Level 5 Level 0 Level 7 Level 5 Level 0 Level 5
- Ring Type
This menu allows you to select how to be informed of any incoming call.
Following types are available.
Melody : Your phone rings using the ringing melody selected at menu option of Ring Melody
option.
Vibrator : Your phone rings using the vibrator.
Light : Your phone rings using the backlight illuminated on the display screen, rather than
the normal ringing tone or vibrator.
Melody + Vibrator : Your phone rings using both melody and vibrator simultaneously.
- Ring Volume
This option allows you to adjust the ringing volume to one of eight levels.
Use [NAVI-UP] and [NAVI-DOWN], and then press [Select soft key].
- SMS Alert Type
This menu allows you to select how to be informed of new incoming SMS message.