User's Manual

INNO-P11 User’s Guide INNOSTREAM Confidential
PAGE : 19 of 99
icon in the title area of the screen indicates that you are currently on a call.
icon in the title area of the screen indicates that you are in the conference call state. (For
example, 2 active calls or 2 held calls)
The boxed digits in middle place of the title area of the screen indicate the number of the
focused call in the multiple calls state. You can focus to next or previous call by pressing
[NAVI-RIGHT] or [NAVI-LEFT].
In the main area of the screen, you can see the number or name (if stored in the phonebook) and
the call state of the focused call. Depending on your subscription, you may see the remaining
cost in the bottom area of the screen.
The time counter in the bottom area of the screen starts when the call starts and indicates how
long you have been on the call.
! Note: All of the call control options are not always displayed through all calls, necessary
options only will be displayed according to the call state.
5.1 Putting a call on hold/unhold
You can put the current call on hold when the call is active state if this service is supported on
the network.
1. Press [Hold soft key], or select the Hold option in the Option menu if muted.
2. To make the held call reactivate, press [Unhold soft key], or select the Unhold option
in the Option menu if muted.