User's Manual
Table Of Contents
- Before You Start
- Getting Started
- Security Codes
- Making and Receiving a Call
- 4.2 Answering a call
- In-Call Options
- Phonebook
- Text Editing
- The Menu Map
- Internet
- The Menu Functions
- The following four options are available by pressing [Option
- Go To : launches the WAP browser and loads the page bookmark
- Edit : allows you to alter the name/URL of the bookmark.
- Delete : deletes the current bookmark.
- 9.8.5 Settings
A WAP profile consists of a group of n - - Activate
- If you select Edit, the following options are available.
- Homepage : Enter the address of the WAP page that you want
- Connection Type : Select type of internet connection.
- Connection Options : The options are None or Secure and depe
- Bearer : You must select the bearer service provided by you
- either GSM Data or GPRS.
- Data Service Settings include:
- The service settings below are only available when GSM Data
- IP Address You must enter the IP address of the WAP gateway
- The service settings below are only available when GPRS has
- service. GPRS (General Packet Radio Service) allows fast and
- can always be online.
- - Rename
- This option changes the name of the chosen profile.
- Cache Mode For Always Check, the cache - - Push Security
- This options are used for filtering the received push messag
- Accept All : You can receive all push messages.
- - Display Images This allows you to select whether images o
- VIS (Vector Image Service)
- Data and Fax
- 12. Phone and Battery Care
- 13. Troubleshooting
- Glossary
- Safety Information
- Index
INNO 30 User’s Guide INNOSTREAM Confidential
PAGE : 15 of 93
SIM Lock Code is used to safeguard your phone being used by another SIM card. The SIM Lock
Code is composed of 4 digits. The code is a security code entered when you enable the SIM
Lock menu.
3.6 Lock Code
Lock Code is used to prevent your phone from being used by another person. The code is
composed of 4 digits. The code is provided with your phone and is preset from factory to default
setting of ‘ 0 0 0 0’
3.7 Password
Password is used to access call barring service and the code is the network password of four
digits code. In order to get the Password, you should subscribe call barring service on your
network service provider and then request for the Password.
4. Making and Receiving a Call
4.1 Making a call
1. To make a call on your phone, enter the area code and the phone number in the idle screen.
In case you enter a number incorrectly, press the [
Clear soft key] once to delete the last digit
that you have entered. To remove all the digits, press and hold the [Clear soft key] down until
they are deleted, or press [END].
2. Press the [SEND].
If the number is identified from the phonebook, the name is displayed.
You can hear the Connect Tone when the call is answered from the called person, if you set it
On. For more details, please see Sound Setting menu in Section 9.
If you want to end the call whilst making a call, press [
End soft key] or [END], or close the
folder. The screen will display a brief message and return to the idle.
! Note: The brief message at the call ending may remain long time if the network is busy.
If the earphone is inserted, or if the call is data call, the folder closing does not make
the call end
.
Quick dialling from Phonebook list
1. Press [Phonebook soft key] in the idle screen.
Search the group with [NAVI-LEFT] or [NAVI-RIGHT] to find the group of person you want
the call to belong to.