User's Manual
Table Of Contents
- Before You Start
- Getting Started
- Security Codes
- Making and Receiving a Call
- 4.2 Answering a call
- In-Call Options
- Phonebook
- Text Editing
- The Menu Map
- Internet
- The Menu Functions
- The following four options are available by pressing [Option
- Go To : launches the WAP browser and loads the page bookmark
- Edit : allows you to alter the name/URL of the bookmark.
- Delete : deletes the current bookmark.
- 9.8.5 Settings
A WAP profile consists of a group of n - - Activate
- If you select Edit, the following options are available.
- Homepage : Enter the address of the WAP page that you want
- Connection Type : Select type of internet connection.
- Connection Options : The options are None or Secure and depe
- Bearer : You must select the bearer service provided by you
- either GSM Data or GPRS.
- Data Service Settings include:
- The service settings below are only available when GSM Data
- IP Address You must enter the IP address of the WAP gateway
- The service settings below are only available when GPRS has
- service. GPRS (General Packet Radio Service) allows fast and
- can always be online.
- - Rename
- This option changes the name of the chosen profile.
- Cache Mode For Always Check, the cache - - Push Security
- This options are used for filtering the received push messag
- Accept All : You can receive all push messages.
- - Display Images This allows you to select whether images o
- VIS (Vector Image Service)
- Data and Fax
- 12. Phone and Battery Care
- 13. Troubleshooting
- Glossary
- Safety Information
- Index
INNO 30 User’s Guide INNOSTREAM Confidential
PAGE : 87 of 93
7. If any tone is not generated when you press a keypad.
You need to check the quick silence mode setting. If you can find icon on the top of the main
display screen it is the quick silence mode. By pressing and holding [VOL-UP] on the idle
screen, you can switch it off.
You need to check the Key Tone Type of Sound Setting menu.
You need to check Key Tone Volume of the profile option that you have set on Profiles menu.
8. If an audible alert is not made when a call is received.
You need to check the quick silence mode setting. If you can find icon on top of the main
display screen it is the quick silence mode. By pressing and holing [VOL-UP] on the idle screen,
you can switch it off.
You need to check Ring Type and Ring Volume of the profile option that you have set on
Profiles menu.
9. If an audible alert is not made when an alarm is expired.
You need to check the quick silence mode setting. If you can find icon on top of the main
display screen it is quick silence mode. By pressing and holing [VOL-UP] on the idle screen,
you can switch it off.
10. If an outgoing call is not made.
You have probably set an outgoing calls barring option. You need to check Call Barring menu.
Otherwise, you have probably set to Hide Number in Caller Number menu of Call Setting menu.
In some network, when you make a call with hiding the telephone number, the network does not
allow to make the call.
11. If an incoming call is not made.
You have probably set an incoming calls barring option. You need to check Call Barring menu.
12. If an outgoing SMS message is not sent.
You need to check the Message Center option in SMS Setting menu.
13. If all audible key tones are muted and all audible alerts are changed to vibrator alert.
You need to check the quick silence mode setting. If you can find
icon on top of the main
display screen it is the quick silence mode. By pressing and holing [VOL-UP] on the idle screen,
you can switch it off.
14. If some audible action is not prompted on a menu of Sound Setting menu.
You need to check the quick silence mode setting. If you can find icon on top of the main
display screen it is the quick silence mode. By pressing and holing [VOL-UP] on the idle screen,
you can switch it off.
15. If nothing is displayed in the
Network Status or Event Area of the Sub Display Screen.
You need to check the Network Name Display menu of the Display Setting menu. If you have