User's Manual

INNO 55 User’s Guide INNOSTREAM Confidential
PAGE : 11 of 85
3.6 Lock Code
Lock Code is used to prevent your phone from being used by another person. The code is
composed of 4 digits. The code is provided with your phone and is preset from factory to default
setting of ‘ 0 0 0 0’
3.7 Password
Password is used to access call barring service and the code is the network password of four
digits code. In order to get the Password, you should subscribe call barring service on your
network service provider and then request for the Password.
4. Making and Receiving a Call
4.1 Making a call
1. To make a call on your phone, enter the area code and the phone number in the idle screen.
In case you enter a number incorrectly, press the [Clear soft key] once to delete the last digit
that you have entered. To remove all the digits, press and hold the [Clear soft key] down until
they are deleted, or press [END].
2. Press the [SEND].
If the number is identified from the phonebook, the name is displayed.
You can hear the Connect Tone when the call is answered from the called person, if you set it
On. For more details, please see Sound Setting menu in Section 9.
If you want to end the call while making a call, press [End soft key] or [END], or close the
folder. The screen will display a brief message and return to the idle.
! Note: The brief message at the call ending may remain long time if the network is busy.
If the earphone is inserted, or if the call is data call, the folder closing does not make
the call end
.
Quick dialling from Phonebook list
1. Press [Phonebook soft key] in the idle screen.
Search the group with [NAVI-LEFT] or [NAVI-RIGHT] to find the group of person you want
the call to belong to.
2. Locate the cursor with [NAVI-UP] or [NAVI-DOWN] to the name or number you want to
call.
3. Press [SEND].
Quick dialling from Speed List