User's Manual

INNO 55 User’s Guide INNOSTREAM Confidential
PAGE : 37 of 85
with a sender E-mail address and its arrival time.
If you press [Option soft key] on the message contents, same options like above are also
available.
<Outbox>
With this menu, you can view the saved E-mail message that has been unsent.
Subject of each E-mail message are displayed on the list.
If you press [Option soft key]on the selected E-mail message, Delete, Send, Forward and Edit
options are available.
With Send option, you can send the saved E-mail message unchanged as it is.
<Create Message>
With this menu, you can write an E-mail message, and then you can save and send it.
Input the E-mail message contents and subject and then press [Ok soft key]. After that, enter
the recipient E-mail address. You can input the E-mail address directly from the Phonebook by
pressing the [P.book soft key].
If you press [Ok soft key] after completing the recipient E-mail address, following options are
available.
Send : Sends the E-mail message to the recipient E-mail address. The E-mail will not be
saved.
Save : Saves the E-mail message and the recipient E-mail address.
Save and Send : Saves the E-mail message and the recipient E-mail address, and then
sends.
<Drafts>
With this menu, you can view a list of any draft E-mail messages that have been created in the
Create Message and saved, but have no subject or no recipient.
Subject or front side of each E-mail message is displayed on the list.
If you press [Option soft key], Delete, Send and Edit options are available.
<Sent>
With this menu, you can view a list of E-mail messages that have been sent.
Subjects are displayed on the list.
If you press [Option soft key], Delete, Send, Forward and Edit options are available.
With Send option, you can send the saved E-mail message unchanged as it is.
! Note : The attachment size of sending E-mail message cannot exceed 45 Kbytes and the
maximum size of sending E-mail message is 100 Kbytes.
<E-mail Setting>
The following options are available.
Connection Profile
With this menu, you can configure which Connection Profile is used to connect over when
sending or receiving E-mail message.