Manual
Installation Instructions for Innotech IG04 BACnet Gateway and Vaisala Transmitter / Sensor
Page 12 © Mass Electronics Pty Ltd 2011Edition 5.0 dated 11/11/2013
Home Page of Embedded Web Server
If your network settings are configured correctly, the home page of the embedded web server should
be displayed. There are two dierent versions of the home page, configured to suit the two dierent
models of supported Vaisala device. The embedded web server identifies which model of Vaisala
device is connected before loading the appropriate home page. Actual live data on the home page
will not be present until the connection between the IG04 BACnet Gateway and Vaisala device has
been properly configured.
The embedded web server's home page for the Vaisala WXT520 Weather Transmitter is illustrated in
Figure 7 below, while the home page for the Vaisala WMT52 Ultrasonic Wind Sensor can be seen at
Figure 8.
From the embedded web server's home page, you can click on the button to launch the
FusionLIVE Java application to modify the Vaisala device or the IG04 BACnet Gateway settings.
The IG04 embedded web server uses HTML and port 80 by default.
NOTE
The historical data presented at the bottom of the home page, in the Previous 7 Days eld, will initially be blank until
enough time has passed to generate historical data.
NOTE
Figure 7: Home page when connected to Vaisala WXT520 Weather Transmitter
Figure 8: Home page when connected to Vaisala WMT52 Ultrasonic Wind Sensor