Manual

Installation Instructions for Innotech IG04 BACnet Gateway and Vaisala Transmitter / Sensor
Page 18 © Mass Electronics Pty Ltd 2011Edition 5.0 dated 11/11/2013
Clock Tab
Under the Clock tab you can configure or modify the following settings:
• Current date and time – used for the Precipitation Reset setting
• Daylight Savings time
• Location – used to create Sunrise / Sunset data on the home page, along with day / night
indication
In order to adjust the Daylight Savings time, you must first enable it by turning the Operation to ON.
You can then adjust the Start and Stop dates for Daylight Savings time. Click on Apply to save your
changes, as illustrated in Figure 14 below.
Figure 14: Configure IG04 settings in FusionLIVE – Clock Tab