User manual ehpocaGEO 2.
We would first of all like to thank you for having chosen one of our products. We are sure you will be happy with it because it represents the state of the art in the technology of home air conditioning. By following the suggestions contained in this manual, the product you have purchased will operate without problems, giving you optimum room temperatures with minimum energy costs. Innova S.r.l This booklet code N273027D - Rev. 05 - (07/19) consists of 28 pages.
USER MANUAL U I S General table of contents EN 1 User manual 1.1 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.2 Management of the appliance with the touch-screen display and remote control ����������������������� 4 1.3 Description of operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.4 Setting cool only or heat only modes . . . .
USER MANUAL U I S USER MANUAL 1.1 Warnings Objects or structural obstacles (furniture, curtains, plants, leaves, blinds, etc.) must not obstruct the normal air flow both from the internal and from the external grids. It is strictly forbidden to place any containers on top of the appliance, especially if they contain liquid. This could trigger a short-circuit, damage the appliance and/ or expose the user to the risk of electrocution.
USER MANUAL U I S EN It is possible to select the various modes by pressing the buttons (see paragraph entitled Description of operations). The remote control provided has been designed to be functional and hard-wearing, however, it must be handled cautiously. Avoid: leaving it exposed to rain, pouring liquids on it or dropping it into water hitting it or dropping it on hard surfaces leaving it under the sun - placing obstacles between the remote and the appliance while using it.
USER MANUAL Key/Display U I S Operation Switching the appliance on and off It is possible to switch the appliance on or off (stand-by) by pressing the specific button. The control system of the appliance is equipped with a memory, so settings will not be lost if the appliance is switched off or in the power supply is cut. This key is used to activate or deactivate the appliance for short periods of time.
USER MANUAL U I S Key/Display Operation Fan speed control (models 8 and 10) By pressing this button several times, the speed will change according to the following sequence: Minimum, Medium, Maximum and Automatic The higher the speed is set, the better the appliance will perform, but it will be less quiet.
USER MANUAL 1.4 U I S Setting cool only or heat only modes It is possible to deactivate the heating or the cooling modes following a simple procedure. Keep the A key on the touch-screen display pressed for 5 seconds until HC (heating and cooling) appears on the display. 1.5 Brightness regulation The display brightness sensor can be disabled (leaving the maximum brightness at all times) by pressing and holding 1.6 The the The The symbol on seconds.
USER MANUAL U I S 1.9 Configuration with the nebulizer 3.0 Season change procedure Note: When installing the nebulizer 3.0 it's very important to follow the indicated procedure to avoid a systematic alarm and the possible failure of the nebulizer. To activate this function: This procedure, enabled through the display of the air conditioner ..2.0, modifies the default settings of the drain pan of the appliance by disabling its automatic closure during the summer season.
USER MANUAL U I S Troubleshooting In the even of a malfunction, please refer to the following table. If, after performing the suggested checks, the problem is not solved, Fault Possible causes please contact the authorised technical assistance. Solution Check there is power supply (by turning a light on, for example). The appliance doesn't switch on Check that the thermal-magnetic circuit breaker used exclusively to protect the appliance has not been tripped (if it has, reset it).
USER MANUAL U I S 1.12 Technical specifications Please read data plate to obtain the technical data listed below. Serial number to enter in the App Power supply voltage Maximum absorbed power Maximum absorbed current Amount of refrigerant gas Casing protection level EN U.M. 8 HP 10 HP DC Inverter 12 HP DC Inverter 12 HP ELEC DC Inverter Cooling power (1) kW 1,65 2,04 2,35 2,35 Power in max cooling mod. Dual Power kW - 2,64 3,10 3,10 Power in min cooling mod.
USER MANUAL U I S 1.13 Periodic Maintenance The air conditioner you have bought has been designed to keep maintenance operations to a minimum, in fact, they only include the following cleaning operations: External cleaning Disconnect the unit from the power supply before each cleaning and maintenance intervention by setting the main power supply switch to off. Wait for the components to cool down in order to avoid any burns.
USER MANUAL U I S INNOVAPP OPERATION InnovApp TwoPointZero EN 2.1 Minimum system requirements The INNOVA TwoPointZero App lets you manage the main parameters of your air conditioner using a smartphone and tablet or with a specific desktop version conveniently from home or when you are out. Using our App is very simple. Just switch on the air conditioner display, set up the connection with your smartphone and begin managing the air conditioner directly from your device.
USER MANUAL U I S After switching on the display of your air conditioner, go to your telephone’s WiFi settings: 1. ensure that you have activated WiFi 1. check the available WiFi connections 1. find the Innova 2.0 network 1. connect to it. Note: with Android devices, this procedure is automatic. With iOS devices, you must enter the WiFi settings of your device and select the “Innova2.0” network.
USER MANUAL U I S 2.3 App features 2.4 General control screen EN GENERAL CONTROL SCREEN of the air conditioner Menu and air conditioner name Air conditioner start-up/ shut off Current conditions (time and temperature) Adjustment settings temperature Air conditioner operating settings (night mode, fan speed, scheduling, our output direction) Air conditioner start-up/ shut off (as at the top right) Current state and the possibility of changing the air conditioner operating mode Figure 2-10 2.
USER MANUAL 2.6 U I S My Products MY PRODUCTS list of the air conditioners and groups configured in the App By selecting the "My Products" item, you can see the air conditioners on the network. They can be edited and/or scheduled as desired. New devices can be added, searching for, installing and configuring them tapping on the + symbol in the top right corner and/or at the bottom right. This will open the screen as illustrated in Figure 2-13.
USER MANUAL U I S 2.7 Mode MODE list of possible air conditioner management modes EN The air conditioner operating mode can be changed in several ways: - selecting "Mode" in the general menu - clicking on the change button at the bottom right of the air conditioner general screen (see section 2.4 on page 15 ). This provides access to the screen illustrated in Figure 2-16. Figure 2-16 2.
USER MANUAL Figure 2-19 U I S Figure 2-20 To change the switching on or off period, click on one of the two times (Figure 2-19). Once scheduling of a day has been confirmed, you will be returned to the screen with the list of the days of the week.
USER MANUAL U I S After completing scheduling, select the “Mode“ item in the general menu, then “Programming“. This activates the weekly program you just created. EN Returning to the air conditioner's main screen (Figure 2-26), on the lower part, there are the indication of the scheduling. If you was in the scheduled shut-down time, the time of the first air conditioner restart will be showed in the lower part.
USER MANUAL Figure 2-29 20 U I S Figure 2-30 Figure 2-31 The App connects the air conditioner to the domestic network and the main screen to manage the appliance will appear again on the smartphone/tablet. At this point, the smartphone/tablet is connected to the selected network. Note: In the event that the procedure is not successful, the smartphone/tablet will automatically reconnect to the local network of the 2.0.
USER MANUAL U I S 2.10 Groups GROUPS list of groups of several air conditioners EN If you have several air conditioners, you can combine them in groups to simplify scheduling and management of them. (For example, the air conditioners in a hotel could be grouped by floor). First of all, select "Groups" in the menu and create a new group by clicking on "+". (Figure 2-32) Then give a "Title" to the group and save using the icon at the top right.
USER MANUAL U I S You can also associate an air conditioner with the group through the air conditioner itself. Select the penultimate icon on the row of the air conditioner (icon list with three rows) and click "Assign groups" (Figure 2-39). Assign the air conditioner to one of the groups shown on the list. When, on the other hand, you click "Sent settings", the settings of that air conditioner are applied to the group that will be selected. Figure 2-38 Figure 2-39 2.
USER MANUAL U I S 2.12 Control with several devices CONTROL WITH SEVERAL DEVICES The same air conditioner can be managed with several devices (smartphone/tablet/PC). t this point, the telephone alerts that you are not connected to the right WiFi network and to connect to the “Innova2.0”: ignore the warning, clicking on the “devices” button right below the loading bar (Figura 2-41).
USER MANUAL U I S 2.13 Management on desktop You can also manage the air conditioner from your computer, configuring a specific desktop version of the App. • utente$ Access the “Software” page of the INNOVA website: www.innovaenergie.com > documents > software MAC • • • • Download the zipped folder “TwoPointZero InnovAPP desktop version - MAC” and open it; double click on the file run.
USER MANUAL U I S 2.14 Troubleshooting Effect Causa The air conditioner cannot be configured on the iOS smartphone iOS smartphones do not automatically identify Go to the telephone's settings and select the WiFi network which was renamed during the 2.0 unit's WiFi network with the name configuration of the App. assigned to it during configuration of the App. Remote configuration is unsuccessful The WiFi network may be weak.
NOTES 26 U I S
U I S NOTES EN 27
realized with iés technology by INNOVA s.r.l. s.r. l . FrazI .Maggio Via St rada, 8 -1638089 - 38085 STORO PIEVE (TN) DI BONO - ITALY(TN) - ITALY tel. +39.0465.670104 fax +39.0465.674965 info@innovaenergie.com N273027D N273027A- -Rev. Rev.