Operation Manual

12
S
I
U
1.13
1
2
3
USER MANUAL
Disconnect the unit from the power supply before
each cleaning and maintenance intervention by
setting the main power supply switch to off.
Wait for the components to cool down in order to
avoid any burns.
Do not use abrasive sponges or abrasive or corrosive
detergents as you might damage the painted surfaces.
When necessary, clean the external surfaces with a soft
damp cloth.
The air conditioner you have bought has been designed to
keep maintenance operations to a minimum, in fact, they
only include the following cleaning operations:
- Clean the air filter after a period of continuous use
and according to the concentration of impurities in the
air, or when you wish to start-up the appliance after a
period of inactivity.
The filter is located in the top part of the appliance.
To extract the filters:
- open the grid and remove it;
- extract the filters by lifting them;
- remove the dust from the filter with a vacuum cleaner
or by washing it in running water without using
detergents or solvents and leave to dry;
- put the filters back on top of the batteries, taking care
to position them correctly;
- put the grid back.
After filter cleaning check if the panel is properly
mounted.
It is forbidden to use the device without its mesh filter.
The air conditioner you have bought has been designed to
keep maintenance operations to a minimum, in fact, they
only include the following cleaning operations:
Periodic Maintenance
Cleaning the filters
External cleaning