User Manual

About the Scan Tool
DISPLAY FUNCTIONS - INITIAL ADJUSTMENTS
8 3040e
8.
Code Enumerator - Indicates the total number of codes retrieved
from the vehicle’s computer.
9.
Test Data Display Area - Displays DTC definitions, Freeze Frame
data and other pertinent test information messages.
10.
SYSTEM icon - Indicates the system with which the code is
associated:
MIL icon ABS icon
11.
FREEZE FRAME icon - Indicates that there is Freeze Frame data
from “Priority Code” (Code #1) stored in the vehicle’s computer
memory.
12.
Code type - Indicates the type of code being displayed; Generic
Stored, Gen
eric Pending, Generic permanent
, etc.
13.
Severity - Indicates the level of severity for the priority code (code
number “1”), as follows:
1 - Service should be scheduled and repairs made when
convenient. This DTC typically has no immediate threat to
essential system components in the short term.
2 - Repair immediately if drivability issues are present. Threat to
essential system components if not repaired as soon as possible.
3 - Stop and repair vehicle immediately to prevent interrelated
failures. Harmful and damaging to essential system components.
INITIAL ADJUSTMENTS
The first time the unit is connected to a vehicle, the Select Language
screen displays. You must select the desired display language (English,
French or Spanish) and unit of measurement (USA or Metric) as follows:
1. Use the UP
and DOWN
buttons, as necessary, to highlight the
desire
d display language.
2. When the desired display language is
selected, press the ENTER
button
to confirm your selection.
 The Select Unit screen displays.
3. Use the
UP
and DOWN
buttons, as necessary, to highlight the
desired unit of measurement.
4. When the desir
ed unit of meas
urement
is selected, press the ENTER
button to confirm your selection.
After the initial lang
uage and unit of measurement selections
are performed, these, as well as other settings, can be
changed as desired. Proceed to “ADJUSTMENTS AND
SETTINGS” on page 70 for further instructions.