User Manual

Using the Scan Tool
THE SYSTEM MENU - VIEWING OEM ENHANCED DTCs
3040e 37
 To prolong battery life, the Scan Tool automatically shuts “Off”
approximately three minutes after it is disconnected from the
vehicle. The DTCs retrieved, captured Live Data Information,
Monitor Status and Freeze Frame data (if any) will remain in the
Scan Tool’s memory, and may be viewed at any time by turning
the unit “On”. If the Scan Tool’s batteries are removed, or if the
Scan Tool is re-linked to a vehicle to retrieve codes/data, any
prior codes/data in its memory are automatically cleared.
THE SYSTEM MENU
The System Menu provides the ability to retrieve “enhanced” DTCs and
Anti-Lock Brake System (ABS) DTCs for most Audi, BMW, Chrysler/Jeep,
Ford/Mazda, GM/Isuzu, Hyundai, Kia, Mercedes Benz, Toyota/Lexus and
Volkswagen vehicles. The types of enhanced data available depends on the
vehicle make.
Depending on the vehicle under test, some features and
functions may not be available.
 To access the System Menu, press the
SYSTEM MENU
button. Use the
UP
and DOWN buttons, as
necessary, to highlight the desired
option, then press the ENTER
button to view the selected information.
To view ABS DTCs: Select ABS from the
System Menu. Refer to VIEWING ABS
DTCson page 48 to view ABS DTCs for
your vehicle.
To view OEM enhanced DTCs: Select
OEM Enhanced from the System Menu.
Refer to VIEWING OEM ENHANCED DTCs
on page 37 to view OEM enhanced DTCs
for your vehicle.
VIEWING OEM ENHANCED DTCs
The “enhanced” mode provides the ability to retrieve OEM enhanced
DTCs from most Chrysler/Jeep, Ford/Mazda, GM/Isuzu, Honda/Acura
and Toyota/Lexus vehicles. The types of enhanced data available
depends on the vehicle make. You can also retrieve Anti-Lock Brake
System (ABS) DTCs.