User Manual

Using the Scan Tool
VIEWING OEM ENHANCED DTCs
38 3040e
To view Enhanced DTCs:
1. With the Scan Tool on the Code
Retrieval screen, press and release the
SYSTEM MENU
button.
 The System Menu displays.
2. Use the UP
and DOWN
buttons, as necessary, to highlight OEM
Enhanced, then press the ENTER
button.
 If enhanced communication is not
supported by the vehicle under test,
an advisory message displays.
Press the LINK
button to re-
link to the vehicle’s computer.
Enhanced functionality is not
available for your vehicle.
Refer to the appropriate paragraph to view enhanced DTCs for your
vehicle:
 Chrysler/Jeep Enhanced DTCs .............page 38
 Ford/Mazda Enhanced DTCs ................page 40
 GM/Isuzu Enhanced DTCs ....................page 43
 Honda/Acura Enhanced DTCs ..............page 44
 Toyota/Lexus Enhanced DTCs..............page 46
Chrysler/Jeep Enhanced DTCs
When Chrysler OEM Enhanced is chosen
from the System Menu, the Scan Tool
retrieves OEM enhanced DTCs from the
vehicle’s computer.
1. A “One moment please” message
displays while the Scan Tool retrieves
the selected DTCs.
 If the Scan Tool fails to link to the
vehicle’s computer, a “Communication
Error” message shows on the Scan
Tool’s display.
- Ensure your vehicle is OBD2
compliant. See VEHICLES
COVERED on page 4 for vehicle
compliance verification information.
- Verify the connection at the DLC,
and verify the ignition is ON.
- Turn the ignition OFF, wait 5 seconds, then back ON to reset
the computer.
- Press the LINK
button to continue.