User Manual

Using the Scan Tool
VIEWING OEM ENHANCED DTCs
44 3040e
 The related code definition is shown in the lower section of the
LCD display.
If the definition for the cur-
rently displayed code is not
available, an advisory mes-
sage shows on the Scan
Tool’s LCD display.
I/M MONITOR STATUS
icons are not displayed
when viewing enhanced
DTCs.
In the case of long code definitions, a small arrow is shown
in the upper/lower right-hand corner of the code display
area to indicate the presence of additional information. Use
the UP
and DOWN buttons, as necessary, to
view the additional information.
 The Scan Tool will display a code only
if codes are present in the vehicle’s
computer memory. If no codes are
present, a “No OEM Enhanced DTC’s
are presently stored in the vehicle’s
computer” is displayed. Press the
SYSTEM MENU
button to return
to the System Menu.
3. If more than one code was retrieved press the DTC/FF button, as
necessary, to display additional codes one at a time.
4. When the last retrieved DTC has been displayed and the DTC/FF
button is pressed, the Scan Tool returns to the “Priority” code.
 To view additional enhanced DTCs, repeat steps 1 through 4,
above.
 To exit the enhanced mode, press the SYSTEM MENU
button to return to the System Menu. Use the UP
and
DOWN
buttons, as necessary, to highlight Global OBD, then
press the ENTER
button to return to the Global OBD2 mode.
Honda/Acura Enhanced DTCs
When Honda OEM Enhanced is chosen
from the Main Menu, the Scan Tool
retrieves OEM enhanced DTCs from the
vehicle’s computer.
1. A “One moment please” message
displays while the Scan Tool retrieves
the selected DTCs.