User Manual

Using the Scan Tool
VIEWING ABS DTCs
3040e 49
- Contact Technical Support for assistance.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 6 for a description of
LCD display elements.
 A visible icon indicates that the diagnostic tool is being
powered through the vehicle’s DLC connector.
 A visible icon indicates that the
diagnostic tool is linked to (communi-
cating with) the vehicle’s computer.
 The upper left corner of the display
shows the Diagnostic Trouble Code
(DTC), the number of the code
currently being displayed and the
total number of codes retrieved, and
the type of code.
 The related code definition is shown in the lower section of the
LCD display.
If the definition for the currently
displayed code is not available,
an advisory message shows on
the Scan Tool’s display.
I/M MONITOR STATUS icons are
not displayed when viewing ABS
DTCs.
In the case of long code definitions, a small arrow is shown in
the upper/lower right-hand corner of the code display area to
indicate the presence of additional information. Use the UP
and DOWN buttons, as necessary, to view the
additional information.
 The Scan Tool will display a code
only if codes are present in the
vehicle’s computer memory. If no
codes are present, a "No ABS DTC’s
are presently stored in the vehicle’s
computer" is displayed. Press the
SYSTEM MENU
button to return
to the System Menu.
3. If more than one code was retrieved press the DTC/FF button, as
necessary, to display additional codes one at a time.
4. When the last retrieved DTC has been displayed and the DTC/FF
button is pressed, the diagnostic tool returns to the “Priority” code.
 To exit the enhanced mode, press the SYSTEM MENU
button. The Scan Tool returns to the System Menu.