User Manual

Additional Functions
VIEWING THE FIRMWARE VERSION - THE TOOL LIBRARY
70 3040e
 If the alternator voltage is less than 9 V, the red, yellow and
green SYSTEM STATUS LEDs will flash on and off.
8. Press the M button to return to the Main Menu.
VIEWING THE FIRMWARE VERSION
1. While linked to a vehicle, press and
release the M button.
 The Main Menu displays.
2. Use the UP
and DOWN
buttons, as necessary, to highlight
Firmware Version in the Main Menu,
then press the ENTER
button.
 The Firmware Version screen displays.
 The screen shows the diagnostic
tool’s current firmware version,
bootloader version and database
version.
3. Press the M button to return to the Main
Menu.
THE TOOL LIBRARY
The Tool Library contains valuable reference information for the Scan
Tool. The following functions are available:
 Tool Icons – Shows the full names for the I/M MONITOR STATUS
icons and descriptions of informational icons shown on the
diagnostic tool’s display.
 DTC Library – Provides access to a
library of OBD2 DTC definitions.
 LED Definitions – Provides
descriptions of the meaning of the Scan
Tool SYSTEM STATUS LEDs.
1. While linked to the vehicle, press the M
button.
 The Main Menu displays.
2. Use the UP
and DOWN
buttons, as necessary, to highlight Tool
Library, then press the ENTER
button.
 The Tool Library menu displays.