User Manual

Additional Functions
THE TOOL LIBRARY
72 3040e
4. Use the UP and DOWN buttons,
as necessary, to scroll to the desired
DTC type (P=Powertrain, U=Network,
B=Body, C=Chassis), then press the
DTC button.
 The selected character displays solid,
and the next character is highlighted.
5. Select the remaining digits in the DTC in the same way, pressing the
DTC button to confirm each digit. When you have selected all the
DTC digits, press the ENTER
button to continue.
6. When you have finished viewing the DTC
definition, use the UP
and DOWN
buttons, as necessary, to highlight
Back, then press the ENTER
button
to return to the Enter DTC screen and
enter additional DTCs; or, press the M
button to return to the Main Menu.
If a definition for the DTC you
entered is not available, an advisory
message shows on the diagnostic
tool’s display. Use the UP
and
DOWN
buttons, as necessary,
to highlight Back, then press the
ENTER
button to return to the
Enter DTC screen and enter
additional DTCs; or, press the M
button to return to the Main Menu.
Viewing LED Definitions
The SYSTEM STATUS LEDs on the Scan Tool provide a visual
indication of the I/M Readiness status of the vehicle under test. The
LED Definitions function provides a description of the meanings of the
green, yellow and red SYSTEM STATUS LEDs.
1. From the Tool Library menu, use the UP
and DOWN buttons, as
necessary, to highlight LED Definitions,
then press the ENTER
button.
 The LED Meaning screen displays.
 The screen provides a description of
the meanings of the green, yellow
and red SYSTEM STATUS LEDs.
Use the UP
and DOWN
buttons, as necessary, to scroll the
display.