User Manual

Additional Functions
ADJUSTMENTS AND SETTINGS
3040e 73
2. When you have finished viewing the LED meanings, press the M
button to return to the Main Menu.
ADJUSTMENTS AND SETTINGS
You can access the Adjustments and Settings MENU while the Scan Tool is
in “Live Data” mode. The Scan Tool lets you make several adjustments and
settings to configure the Scan Tool for your particular needs. The following
adjustments and settings are available:
 Adjust Brightness: Adjusts the brightness of the display screen.
 Audible Tone: Turns the Scan Tool’s audible tone “on” and “off.”
When turned “on,” a tone sounds each time a button is pressed.
 Footer Messages: Turns the navigational “footers” at the bottom of
most display screens “on” and “off.”
 Hotkey Legend: Shows functional descriptions for the diagnostic
tool’s hotkeys.
 Language Selection: Sets the display language for the Scan Tool
to English, French or Spanish.
 Unit of Measurement: Sets the Unit of Measurement for the Scan
Tool’s display to USA or Metric.
To enter the Tool Settings Menu:
1. While linked to the vehicle, press and
release the M button.
 The Main Menu displays.
2. Use the UP
and DOWN
buttons, as necessary, to highlight Tool
Settings, then press the ENTER
button.
 The Tool Settings menu displays.
3. Make adjustments and settings as
described in the following paragraphs.
Adjusting Display Brightness
1. Use the UP
and DOWN
buttons, as necessary, to highlight
Adjust Brightness in the Menu, then
press the ENTER
button.
 The Adjust Brightness screen displays.
 The Adjust Brightness field shows
the current brightness setting, from
1 - 5.