User Manual

Live Data Mode
CUSTOMIZING LIVE DATA (PIDs)
24
 If communication with the vehicle is
lost while viewing Live Data, a
Communication Lost" message
shows on the Scan Tool's disp
lay.
5. Press and rele
ase ENTER
to view
the currently selected PID in “graph” mode.
Press and release ENTER
again to
return to the PID list.
 You can display a maximum of two
PIDs
in "graph" mode at any given
ti
me.
 With two PIDs shown in "graph"
mode, press
and hold LD
to
superim
pose one graph on the
other.
Re
lease LD
to separate the graphs.
6. Pr
ess and hold ENTER
to view the
“expanded” definition for the curren
tly
se
lected PID. Release ENTER
to
return to the PID list.
7. If you experience vehicle pr
oblems,
vie
w
and/or compare the Live Data (PID)
information displayed on the Scan Tool
to specif
ications in the vehicle's repa
ir
manual.
If desired, you can "customize" the Live Data dis
play to show only
those PIDs you are interested in viewing. See Customizing Live
Data (PIDs) below for details.
CUSTOMIZING LIVE DATA (PIDs)
You can customize the Live Data display by placing the Scan Tool in
"Custom Live Data" mode and selecting only the PIDs that you wish to
display.
1. With the Scan Tool in Live Da
ta mode
(see VIEWING LIVE DA
TA on
page 23),
press and ho
ld LD until the Li
ve Data
Menu dis
plays, then releas
e.
2. Select Custo
m Live Data
, then press
the ENT
ER
button.
 If the Scan Tool fails to establish communication with the vehicle,
a “C
ommunication Error” message displa
ys.
-
Ensure your vehicle is OBD2 co
mpliant.
- Verify the connection at the DLC, and verify the ignition is ON.
-
Turn the ignition OFF, wait 5 seconds, then back ON to rese
t
t
he computer.
- Press LINK
to continue.