User Manual

Additional Tests
VIEWING TRIP CYCLE PROCEDURES
39
 If the vehicle supports battery Live
Data, the Battery Live Data screen
displays. The screen shows the state
of charge, battery pack voltage and
sum of cell voltages for the battery
pack.
 If the vehicle supports battery cell
display,
a graphic display of the
current state of charge for all cells in
the battery pack
displays.
4. When you hav
e finished view
ing the
retrieved inform
ation, press M to
return
to the Main Menu.
VIEWING DRIVE CYCLE PROCEDURES
A Drive Cycle for a Monitor requires that the vehicle is driven in such a
way that all the required “Enabling Criteria” for the Monitor to run and
complete its diagnostic testing are met. You can use the Scan Tool to
view the Drive Cycle procedures for a selected Monitor.
1. While linked to a vehicle, press M
.
 The Main Menu displays.
2. Select Drive Cy
cle Procedures, then press ENTER
.
 A “One moment please…” message
disp
lays while the Scan Tool
retrieves Moni
tor status from the
vehic
le’s comput
er.
3. When Mon
itor status has been retrieved,
the Drive Cycle Procedures
menu
disp
lays. Depending on Monito
r status,
you can vie
w Drive Cycle procedures
for Monitors Incomplete or Monitors
Complete
.
If Drive Cyc
le Procedures are not available for the vehicle, an
advisory message shows. Select Back, then press ENTER
to return to the Main Menu.
4. Select Monitors Incomplete or Monitors Complete, as desired,
then press ENTER
.
 A list of the available Monitors for
the selected sta
t
us displays.
If no Monitors for the selected
status are dete
cted, an advisory
message shows. Select Back,
then press ENTER
to return
to the Main Menu.