User Manual

Additional Tests
USING THE DLC LOCATOR
40
5. Select the Monitor for which you wish to view Drive Cycle
Procedures, then press ENTER
.
 A “One moment please…” message displays while the Scan
Tool retrieves the requested Drive Cycle Procedure. The Driv
e
Cyc
le Procedures screen for
the Monitor displays when the
procedure ha
s been retrieve
d.
If a Drive Cycle Procedure fo
r the selected Monitor is not
available, an advisory message shows. Select Back, then
press ENTER
to return to the Main Menu.
6. The Drive Cycle Procedure
screen
shows the specific set of operating
procedures tha
t ensure the vehicle is
driven in such a way that all
the
required “En
abling Criteria” for the
Monitor to run and complete its
diagnostic testin
g are met.
7. When yo
u are finished view
ing the
Driv
e Cycle Procedures, press ENTER
to return to the Drive Cycle Procedures menu, or, press M to
return to the Ma
in Menu.
USING THE DLC LOCATOR
1. Select DLC Locator in the Main Menu, then press ENTER .
 The Select Vehicle Model Year screen displays.
2. Select the desir
ed vehicle model year, then press ENTER
.
 The Select Vehicle Manufacturer screen displays.
3. Select the desir
ed vehicle manufacturer, then press ENTER
.
 The Select Vehicle Model screen displays.
4. Select the desir
ed model, then press the ENTER button.
 The DLC Location screen for the
selected ve
hicle
displays.
 The DLC Location screen shows the
selected v
ehicle make and model, a
description of the DLC location
and
whether the
DLC is “covered
” or
“uncovered,” an
d includes a picture
of the DLC loca
tion.
5. When yo
u have finished viewing the DLC location, press any ho
tkey
to exit the DLC Locator.