User Manual

Additional Tests
THE TOOL LIBRARY
43
 The Firmware Version screen displays for four seconds.
 The screen shows the Scan Tool’s current firmware version,
bootloa
der version and databas
e version.
2. The display returns
to the Main
Menu.
THE TOOL LIBRARY
The Tool Library contains valuable reference information for the Scan
Tool. The following functions are available:
 Tool Icons – Shows the full names for the I/M MONITOR STATUS
icons shown and descriptions of informational icon
s on the Scan
Tool’s d
isp
lay.
 DTC Library – Provides access library of OBD2 DTC definitions.
 LED Meaning – Provides descriptions of the meaning of the Scan
Tool SY
STEM STATUS LE
Ds.
1. While linked to the vehic
le, press M
.
 The Main Menu displays.
2. Select Tool
Library, then press ENTER
.
 The Tool Library menu displays.
Viewing To
ol Icon Descriptions
The I/M MONITOR STATUS icons on the Scan Tool’s LCD display
provide an indication of the “Completed / Not Complete” status for all I/M
Monitors supported by the vehicle under test. The Tool Icons function
displays the full name for each Monitor icon, as well as descriptions of
the meanings of other informational icons shown on the Scan Tool’s
display.
1. From the Tool Library menu, select Tool Icons, then press ENTER
.
 The Tool Icons screen displays.
 The screen shows a list of the 15
Monitor icons, along with the full
name for eac
h icon, as well as
descripti
ons of the meanings of
other informational icons. Use the
UP
and DOWN buttons, as
necessary, to scrol
l the li
st.
2. When you have
finished viewing the tool icon descriptions, press M
to return to the
Main Menu.