User Manual

Additional Tests
THE TOOL LIBRARY
44
Using the DTC Library
1. From the Tool Library menu
, select
DT
C Library, then press ENTER
.
 The Select Library screen displays.
2. Select
OBD2 Library, then press
ENTER
.
 The Select Manufacturer screen
disp
lays.
3. Select the desired vehic
l
e manufacturer,
then press EN
TER
.
 The Enter DTC screen displays.
The screen shows the code
“P0001,” with the “P” highlig
hted.
4. Use th
e UP
and DOWN buttons,
as necessary, to scroll to the desired DT
C
typ
e (P=Powertrain, U=Network, B=Body,
C=Chassis), then press DTC/FF.
 The selected character displays solid,
and the next character is highlighted.
5. Select the remaining digits in the DT
C
in the same way. When you have
selected a
ll the DTC digits, press
ENTER
to view the DTC definition.
6. When you ha
ve finished viewing the
DTC definition, highlight Back, then
press ENTER
to return to the Enter
DTC screen and enter addition
al DTCs;
or, p
ress M to return to th
e Main Menu.
If
a definition for the DTC you entered is not available, an advisory
message shows. Highlight Back, then press ENTER
to return
to the Enter DTC screen and enter additional DTCs; or, press M to
return to the Main Menu.
Viewing LED Meanings
The SYSTEM STATUS LEDs on the Scan Tool provide a visual
indication of the I/M Readiness status of the vehicle under test. The
LED Meanings function provides a description of the meanings of the
green, yellow and red SYSTEM STATUS LEDs.
1. From the Tool Library menu, select LED
Meaning, then press ENTER
.
 The LED Meaning screen displays.