Quick Start Guide User Manual

MTS components:

 LC-1 (Lambda Cable): #3769

 XD-16: #3780

 AuxBox (LMA-3) #3742

 HBX-1: Heat-sinking Bung Extender: #3729

Replacement Parts:

 MTS 2.5mm to 2.5mm serial cable: #3760

 Serial Programming Cable: #3746

 Accessory Kit: #3749

 Thermocouple Wire: #3747

Order parts, get support, find FAQ answers, and read case

studies at www.tuneyourengine.com

To gain access to the complete DL-32 manual please

install the software provided on the CD which was

included as part of your kit. The manual will contain

important information such as placement, programming ,and

other tips & tricks.

11-0085

< (10-2303.B)

DL-32

QUICK START GUIDE

The complete instruction manual is on the CD

To gain access to the complete DL-32 manual please install the

software provided on the CD which was included as part of your kit.

The manual will contain important information such as placement,

programming ,and other tips & tricks.

PAGE 1
MTS components: LC-1 (Lambda Cable): #3769 XD-16: #3780 AuxBox (LMA-3) #3742 HBX-1: Heat-sinking Bung Extender: #3729 < (10-2303.B) DL-32 QUICK START GUIDE Replacement Parts: MTS 2.5mm to 2.5mm serial cable: #3760 Serial Programming Cable: #3746 Accessory Kit: #3749 Thermocouple Wire: #3747 The complete instruction manual is on the CD Order parts, get support, find FAQ answers, and read case studies at www.tuneyourengine.
PAGE 2
The complete instruction manual is on the CD DL-32 QUICK START GUIDE Connecting a Record button and Indicator LED As part of the DL-32 package you will have received a LED, a push-button switch, and a stereo 3.5mm cable with three stripped ends. The cable can be extended with shielded stereo wire up to 30 feet. This kit is the record button and indicator. The installation of this is required if you do NOT have an XD-16 connected in the log-chain after the DL-32. 1. 2. 3. 4.