User's Manual

Auxiliary Accessories
Inventor’s Guide insertColor Camera Kit • 4
accessories
Color Camera Kit, continued
Camera Troubleshooting Guide:
Problem:
The LED light on the Camera Receiver is not “on”.
Solutions:
1. Check your batteries to see if they have been installed correctly.
2. Check that batteries are charged.
3. Check that the power switch is in the “on” position.
Problem:
The LED light on the Camera Unit is not “on”.
Solutions:
1. Check that the power switch on the Camera is in the “on” position.
2. Check that the Camera 2-prong connector is correctly connected.
3. Check that the robot is turned “on” and has fresh batteries.
Problem:
The LED light is activated on both the Camera Receiver and the Camera Unit, but I get no
video.
Solutions:
1. Check that the RCA Video Cable is correctly attached to your television and to the
Camera Receiver.
2. Check that your television is on the correct input channel (refer to your TV manual).
3. Check that the “Channel Selector Switch” on the Camera Unit and Receiver are set to
the same number.
Problem:
The video quality is poor.
Solutions:
1. Check that the Camera is not too far away from the Receiver. The Camera will only
work within a certain distance from the Receiver.
2. There may be interference from outside sources. Try changing the channel on the
Camera and the Receiver to a different number, and see if the video quality improves.
Note, the Camera and Receiver must both be set to the same channel.
3. The RCA Video Cable may be slightly disconnected, try disconnecting and reinstalling
the cable for a better connection.
4. The RCA Cable may be damaged or broken. Try an alternate RCA cable.
5. The battery level on your robot or Camera Receiver is low, replace the batteries.