VHF WIRELESS MICROPHONE USER’S MANUAL PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION
SPECIFICATIONS Parts Description Receiver Frequency Range: Frequency Stability: Sensitivity: Frequency Response: Audio Output Level: S/N: Distortion: Power Supply: Current Consumption: RECEIVER 177.6MHz or 186.6MHz or 198.6MHz or 204.6MHz 10PPM -92dBm 80Hz~12KHz 150mV(RMS) >75dB <1% DC 9V 200mA 150mA Transmitter Frequency Range: 177.6MHz or 186.6MHz or 198.6MHz or 204.
HANDHELD MIC Parts Description 1. Grille(Capsule inside) 2. Power/low battery Indicator 3. Power ON/OFF/MUTE Switch 4. Battery Compartment/Cover 1 2 3 4 Operation 1. Open battery cover. Install the provided 2pcs 1.5V AA batteries and then close the cover. Pay attention to the correct polarity. 2. Push power switch to ON position, power indicator should flash once briefly indicating that the transmitter has sufficient power.
