User Manual
Table Of Contents
- LC 1200 Manual (v1.00)
- FCC Statement of Conditions
- Warranty Statement
- How to use this manual
- Table of Contents
- Ch. 1 - The LC 1200 System
- Ch. 2 - The LC unit
- Ch. 3 - Tags & TAD
- Ch. 4 - The Magnetic Switch
- Ch. 5. - Passive Infrared Reader (PIR)
- Ch. 6 - The Keypad
- Ch. 7 - Push Button Override (PBO)
- Ch. 8 - External Sounders
- Ch. 9 - Magnetic Locks
- Ch. 10 - Elevator Deactivation
- Ch. 11 - Automatic Door Deactivation
- Ch. 12 - Fire Panel Interface (FPI)
- Ch. 13 - Timer
- Ch. 14. - Alert Panels
- Ch. 15 - System Maintenance & Testing
- Ch. 16 - FAQ & Troubleshooting
- Appendix A: Component Cut Sheets
- Glossary
- Index
Accutech reserves the right to substitute comparable components without notice.
R051903
M090503
CUT SHEET: Magnetic Switch
The Magnetic Switch is used on doors when alarm activation is not desired unless the door is opened.
ELECTRICAL:
Operating Voltage: 150V DC maximum
Contact Rating: 3 watts
Maximum Switch Voltage: 30V AC/DC
Switching Current: 0.5 amps DC
Cable: needs minimum 22-gauge, 2-conductor
MECHANICAL:
Size: 2.50” x 0.80” x 0.60”
Weight: 1.2 ounces
Color: Brown
Surface mounted (Flush available)
OPERATING CHARACTERISITICS:
Contacts: N.O., N.C., and Common
Initial contact resistance: 100 ohms maximum
Operating Time: 1.0 ms maximum
Bounce Time: N.C. leg 1.5 ms maximum
N.O. leg 1.0 ms maximum
Release Time 0.5 ms maximum
Maximum Operating Frequency: 200 Hz
Insulation resistance: 1 x 10 ohms maximum
Electrostatic capacitance: 1.5 pF maximum
ENVIRONMENTAL:
Operating Temperature: 32º to 120º Fahrenheit
Intended for indoor use only.
DUTY CYCLE:
Rated for continuous use.
Magnetic Switch
Model Number: MCSM
UL Listed:
AMQV.BP2343
Magnetic Switch Placement
800-356-2671 | Accutech | www.accutech-ics.com