User Manual
Table Of Contents
- LC 1200 Manual (v1.00)
- FCC Statement of Conditions
- Warranty Statement
- How to use this manual
- Table of Contents
- Ch. 1 - The LC 1200 System
- Ch. 2 - The LC unit
- Ch. 3 - Tags & TAD
- Ch. 4 - The Magnetic Switch
- Ch. 5. - Passive Infrared Reader (PIR)
- Ch. 6 - The Keypad
- Ch. 7 - Push Button Override (PBO)
- Ch. 8 - External Sounders
- Ch. 9 - Magnetic Locks
- Ch. 10 - Elevator Deactivation
- Ch. 11 - Automatic Door Deactivation
- Ch. 12 - Fire Panel Interface (FPI)
- Ch. 13 - Timer
- Ch. 14. - Alert Panels
- Ch. 15 - System Maintenance & Testing
- Ch. 16 - FAQ & Troubleshooting
- Appendix A: Component Cut Sheets
- Glossary
- Index
Accutech reserves the right to substitute comparable components without notice.
R051903
M090503
CUT SHEET: Passive Infrared Reader (PIR)
The Passive Infrared Reader (PIR) is a device that uses an infrared sensor to monitor elevators, hallways, corridors, and
passageways. Like the Magnetic Switch, the PIR is used in areas where alarm activation is not desired immediately upon Tag
detection. It can also be used in hallways or other areas where a Magnetic Switch would not be feasible.
ELECTRICAL:
Operating Voltage: 12V DC
Current: Stand-by 10 mA
Relay Output: N.O./N.C. 2A/28V AC/DC maximum
Cable: needs minimum 22-gauge 4-conductor stranded,
non-shielded
MECHANICAL:
Dimensions: 2.50” x 4.40” x 1.40”
Weight: 3 ounces
Color: White
OPERATING CHARACTERISTICS
Beam Coverage: Vertical curtain up to 15 x 15 feet.
*The beam is adjustable from its normal 0º setting
(perpendicular to the unit) up to 12º.
ENVIRONMENTAL:
Operating Temperature: 32º to 120º Fahrenheit
Intended for indoor use only.
DUTY CYCLE:
Rated for continuous use.
Passive Infrared Reader (PIR)
Model Number: PIR
UL Listed:
ANSR.BP6082
PIR Ceiling Mounted Coverage Area Example
800-356-2671 | Accutech | www.accutech-ics.com