User Manual
Table Of Contents
- LC 1200 Manual (v1.00)
- FCC Statement of Conditions
- Warranty Statement
- How to use this manual
- Table of Contents
- Ch. 1 - The LC 1200 System
- Ch. 2 - The LC unit
- Ch. 3 - Tags & TAD
- Ch. 4 - The Magnetic Switch
- Ch. 5. - Passive Infrared Reader (PIR)
- Ch. 6 - The Keypad
- Ch. 7 - Push Button Override (PBO)
- Ch. 8 - External Sounders
- Ch. 9 - Magnetic Locks
- Ch. 10 - Elevator Deactivation
- Ch. 11 - Automatic Door Deactivation
- Ch. 12 - Fire Panel Interface (FPI)
- Ch. 13 - Timer
- Ch. 14. - Alert Panels
- Ch. 15 - System Maintenance & Testing
- Ch. 16 - FAQ & Troubleshooting
- Appendix A: Component Cut Sheets
- Glossary
- Index
Accutech reserves the right to substitute comparable components without notice.
R051903
M090503
CUT SHEET: Staff Alert Panel (SAP)
The Staff Alert Panel (SAP) notifies staff when an alarm occurs in a monitored zone through a piezo buzzer and alarm-
specific LEDs. Each monitored zone is labeled and marked with an LED that will light to indicate that an Alarm Condition
has occurred for that particular zone. In addition, a “Fire Alarm” LED will light on the display if the fire circuit is activated.
ELECTRICAL:
Operating Voltage: 10 to 13V DC
Current Consumption: 300 mA Max
Cable: needs minimum 22-gauge, 6-conductor from
each Controller
MECHANICAL:
Size: 11” x 5-3/8” x 1-3/8”
Weight: 1 US pound
OPERATING CHARACTERISTICS
LED Alarm indicator
s:
Flashing Red – ALARM
Steady Red – DOOR AJAR
Flashing Yellow – CHECK SYSTEM
Steady Yellow – LOITER
Fire Alarm LED
Power LED
Built-in Piezo buzzer
ENVIRONMENTAL:
Operating Temperature: 32º to 120º Fahrenheit
Intended for indoor use only.
DUTY CYCLE:
Rated for continuous use.
Staff Alert Panel (SAP)
Model Number: SAP
800-356-2671 | Accutech | www.accutech-ics.com