User Manual

3-2 Tags & TAD LC 1200 Manual
6. Follow the same procedure for SB
Tags (Figure 3.4).
Figure 3.4 Attaching SB Tag style
Tag and Band Maintenance
 Testing Tags
 Cleaning Tags
 Cleaning Bands
 Storing Tags

Storing Bands
Testing Tags
For maximum protection of residents or
assets, Accutech recommends that Tags be
tested on a weekly basis.
There are 2 ways that you can test Tags:
 Enter a monitored zone
 With a TAD (
see page 3-5)
Cleaning Tags
All Tags are reusable but they must
be
cleaned and sanitized between applications.
In long-term applications, periodically
replace the bands and clean the Tags.
There are a few methods that can be used to
clean and sanitize Tags:
However, DO NOT:
 Do not soak Tags in cleaning solutions
 Do not put Tags in an AutoClave
 Do not put Tags in a dishwasher
 Do not steam clean Tags
 Do not put Tags in a washing machine
or dryer
 Do not use solvents or abrasive
cleaners
Acceptable Tag Cleaning Methods:
 Antibacterial wipes
 Hydrogen peroxide (wipe, do not soak)
Cleaning Bands
All Tag bands are for one-time use only. In
long-term applications, periodically replace
the bands and clean the Tags.
Storing Tags
Ideally, to preserve battery life, Tags should
be turned off
with a TAD during storage.
If for any reason your TAD is unavailable
and you have active Tags no longer in use,
store them in a metal container with lid and
away from sources of electrical noise (
see
below
).
Do not
store Tags within 3 feet of any of the
following sources of electrical noise:

Computer monitors
 Unshielded computer cables
 Television sets
 Medical Monitoring Equipment
 X-ray and other imaging equipment
 Fluorescent Lighting

Wireless Communication Devices
Storing Bands
Extra Tag bands should be stored in clean
and dry environment.