User Manual

6-8 The Keypad LC 1200 Manual
the Keypad has returned to the
programming menu.
7. Press
[#] to exit the programming menu
and return the Keypad to normal
operation.
Programming user codes
1. Prepare a list of user codes you want to
program.
2. Invoke the programming menu by
entering [*][*][master code][*][*].
When the programming menu is active,
the green LED flashes slowly,
approximately once every two seconds.
3. Press [1] to select user code
programming. The green LED begins to
flash rapidly (approximately 5 times per
second) indicating that the Keypad is
ready to receive data.
4. Enter the user number
(02 through 52)
followed by
[#]. For example, to
program user code number 2 you enter
[0][2] followed by [#]. The green
LED lights steadily for two seconds and
then returns to rapid flashing indicating
that the step has been completed
successfully.
5. Enter the code assigned to this user
followed by
[#] (see Figure 5.3 for
example
). The green LED lights steadily
for two seconds and then returns to rapid
flashing.
6. Repeat the user code followed by
[#].
The green LED will acknowledge as in
the step above.
7. Now select which outputs will be
tripped by the user code, select
[3] for
all outputs followed by
[#]. The green
LED lights steadily for two seconds and
then flashes slowly, indicating that the
new user code has been programmed
successfully and that the Keypad has
returned to the programming menu.
8. Repeat steps 3 through 7 to program the
next user code or press
[#] to exit the
programming menu and return the
Keypad to normal operation.
Deleting user codes
To delete individual or all user codes, use the
following instructions:
1. Invoke the programming menu by
entering [*][*][master code][*][*].
When the programming menu is active,
the green LED flashes slowly,
approximately once every two seconds.
2. Enter
[4] to select the user code deleting
function. The green LED will respond
by flashing rapidly indicating that the
Keypad is ready to receive data.
3. Enter the user number whose code you
wish to delete (02 through 56), or enter
[*][*] to delete all user codes and then
press
[#].
The green LED will light steadily for 2
seconds and then will resume rapidly
flashing.
Note: The master code cannot be
deleted in this manner.
4. Enter the
[master code] once more,
followed by
[#]. The green LED will