User Manual

LC 1200 Manual Preface iv
How to use this manual
Thank you for purchasing the LC 1200 System.
This manual will aid you in the understanding
and installation of the LC 1200 System.
The manual is arranged to build upon the
information contained in the previous chapter.
The first three chapters will likely be the
chapters you reference most frequently after the
initial installation. They discuss how the system
works, the inside of an LC unit, activating and
deactivating Tags, monitored zones, addressing
alarms, and attaching Tags and bands.
Each chapter thereafter focuses on a particular
component that interfaces with the LC unit in
the order of the required components (Magnetic
Switch or Passive Infrared Reader, and Keypad)
to additional optional components (External
sounders, Magnetic Locks, Elevator and
Automatic Door Deactivation, Timer, and Alert
Panels).
These chapters contain the specifications,
positioning, mounting, and wiring of each
component. You may not have all the
components listed in this manual with your
initial system. However they can easily be added
at a future date as your needs warrant.
Besides basic mounting tools, the only tools
needed for installation are:
 Spanner key/bit
 Small flat screwdriver
 Wire strippers
When mounting, use mounting hardware
appropriate for the component weight and
mounting surface.
The FAQ and Troubleshooting chapter rounds
out the manual. Here you will find solutions to
common questions about the operation of the
system and remedies to common scenarios.