User's Manual

Installation Manual The Keypad 7-1
The Keypad
 Keypad Specifications
 Positioning the Keypad
 Surface Mounting the Keypad
 Flush Mounting the Keypad
 Connecting the Keypad to the Controller
 Programming the Keypad
The Keypad is used to escort residents through a
monitored zone and to reset zone equipment
once an alarm has occurred.
The Keypad provided by Accutech (Visonic CL-
8A) is intended as an indoor Keypad only. If you
require an outdoor Keypad, contact your
Accutech Representative.
Keypad Specifications
 Power Requirements
 Temperature
 Weight
Power Requirements
12V DC @ 55 mA
Temperature
The Keypad operates best in an ambient
temperature between 35 and 90 degrees
Fahrenheit. Operation outside of this range may
cause unexpected or undesirable results,
including premature failure.
Weight
The Keypad weighs approximately 4.4 ounces.