User's Manual

Installation Manual Appendix B-3
JP12 (Loiter Time Extend Disable)
 Factory Default IN
This jumper determines the timing range of
the Loiter Timer potentiometer (R110)
Table B.7 JP12
Position Time Range
In 10-60 seconds
Out 65-110 seconds
JP13 (Piezo Enable)
 Factory Default IN
This jumper controls whether the piezo is
enabled or disabled.
Table B.8 JP13
Position Piezo is:
In Enabled
Out Disabled
JP14 (Bar Display Enable)
 Factory Default IN
This jumper will enable the bar display
LED 13 to function for installing or testing
purposes.
JP15 (TX Output LED Enable)
 Factory Default IN
This jumper will enable the Tx Output LEDs
(LED1, LED2 and LED3) for installing or
testing purposes.
JP16 (Door Ajar Reset)
 Factory Default IN
This jumper will determine whether the
Door Ajar alarm automatically resets.
Table B.9 JP16
Position Door Ajar Automatically Resets?
In Yes
Out No