User's Manual

Accutech reserves the right to substitute comparable components without notice.
CUT SHEET: Accutech 3101 Magnetic Lock
WARNING: The Accutech 3101 Magnetic Lock is custom-designed to our specifications and should not be purchased directly
from the manufacturer.
The 3101 Magnetic Lock will engage when the zone Controller detects a Tag in the Tx Activation Field. The Lock will
remain engaged as long as the Tag is in the Tx Activation Field. When the Tag leaves the Tx Activation Field, the Lock will
disengage after an adjustable period of time (0-120 seconds).
SAFETY FEATURES:
The Lock will NOT engage (or will disengage) when the facility’s Fire Alarm is activated or power is lost.
The 3101 Magnetic Lock also incorporates Delayed Egress Circuitry that complies with N.F.P.A. 101 Life Safety Codes 5-
2.1.6.1. If engaged, the Lock will release within 15 seconds (after 1-3 second nuisance delay) whenever a maintained force
(less than 15 pounds required) is applied to the door. An audible tone enunciates both countdown and release. When the Lock
releases, the red LED will turn solid green and the alarm will sound continuously.
Accutech 3101 Magnetic Lock
Model Number: MLE
Part Number: 700228
UL Listed:
 FWAX.SA9532
 Auxiliary Locks listed 2N98
 Special Arrangements listed 1M59
ELECTRICAL:
Operating Voltage: 12 V AC
Current Consumption: 450 mA
Cable: non-shielded 18-gauge, 6-conductor
MECHANICAL:
Lock Size: 3” x 2 ¾” x 11”
Armature Size ½” x 2-5/16” x 7-3/8”
Standard Finish: Satin Aluminum-US28
Mounting Hardware: 5 #10 PNHD Self Tapping Screws 1” long
Weight: 11 US pounds
OPERATING CHARACTERISITICS:
Holding Force: 1200 pounds
Once locked, the Lock will disengage when any of the
following conditions occur:
 All Tags leave the Tx Activation Field
 A Keypad Reset
 A PBO is activated
 The facility’s fire alarm is activated.
 Power is removed from the Lock.
 The Central Override is activated.
 When a maintained force (less than 15 pounds required)
is applied to the door for an adjustable period of time
(1-3 seconds).
Due to existing UL listing (above), not
required to be listed under UL 294
(BP9480)
ENVIRONMENTAL:
Operating Temperature: 32º to 120º Fahrenheit
Intended for indoor use only.
DUTY CYCLE:
Rated for continuous use.
Lock LED status during normal operation:
 Green – Power indicator
 Red – Lock engaged (
Tag detected in zone)
 Red blinking – Egress countdown (
15-30 seconds adjustable)
 No Power To LED – Escort function or Reset
800-356-2671 | Accutech | www.accutech-ics.com