User's Manual

Accutech reserves the right to substitute comparable components without notice.
CUT SHEET: Central Alarm
The Central Alarm is a multi-tone alarm. It consists of a Tone Generator that drives speakers located throughout the facility.
There are eight different tones available. You may choose to assign a separate tone for each zone, or multiple zones to just
one tone. The Central Alarm is located in its own enclosure and contains its own power supply, a Tone board, a Relay board
and terminal strips.
ELECTRICAL:
Power Requirements: 120V AC, 15 amp circuit
Current Consumption: 1.3 amps maximum
Zone alarm input: 12V DC
MECHANICAL:
Construction: Metal case
Enclosure size: 12.50” x 12.50” x 3.75”
Weight (including enclosure): 12 US pounds
OPERATING CHARACTERISITICS:
Alarm Output: up to 115db at 10 feet with
12V DC/variable
Speakers: 8 ohms, 15 watts
Maximum Load: 5 speakers
Eight Distinctive Channels and Sounds
 Rapid Yelp
 Standard Yelp
 Hi-Lo sweep
 European Hi-Lo
 Steady
 Pulsing Horn
 Steady Horn
 Unique Synthesized Bell
ENVIRONMENTAL:
Operating Temperature: 32º to 120º Fahrenheit
Intended for indoor use only.
DUTY CYCLE:
Rated for continuous use.
Central Alarm
Model Number: CA3
Part Number: 700026
8 ohm Speaker with Mounting Plate
800-356-2671 | Accutech | www.accutech-ics.com