User's Manual

ManualsBrandsInnovative Control Systems ManualsElectronicsS-TAD

1

2

3

4

5

6

7

8

9

Installation Manual the Multiplexer 17-7

To PC

To connect a Multiplexer to a PC, refer to Figure

17.5 -17.6 and use the following instructions:

1. Using CAT5 and a DB9 connector, connect

the Multiplexer to a serial port of the PC

(serial port #1 recommended).

NOTE: Depending on the distance between

the Multiplexer and the PC, you may want

to use RJ45 wall plates for simplicity.

Figure 17.5 Connecting a Multiplexer to a PC