User's Manual

Installation Manual Appendix A: Discontinued Components A-5
Composite Cable (Part #200355)
 Lock Cable
 Technical Specifications
NOTE:
For easier installation, Accutech
Composite Cable (Part # 200355) was
replaced with Composite Cable (Part #
200371) on June 1st, 2004 and is no longer in
production.
For information on the new composite cable
(Part # 200371), see page 2-2.
Accutech offers a “composite” cable (Figure A.7;
Part # 200355
) for wire runs from the Controller
to a Junction Box when the Controller is
mounted away from the zone.
At the zone, use the cable kits supplied with the
system to run from the Junction Box to the
individual components at the zone.
When wiring composite cable, use the same
color code throughout the Accutech System
(
Figure A.7).
Lock Cable
If your installation includes a Lock, but it does
not have to comply with NFPA101, run 18-
gauge, 2-conductor from the Controller to the
Lock.
If your installation includes NFPA101 compliant
Locks, use 22-gauge, 12 conductor cable to
make the connection between the Controller and
the Lock (
see Figure A.6 and Chapter 11).
Figure A.6 Lock Cable Color Code