ACRILIC TURNTABLE WITH WIRELESS SPEAKERS MODEL:VM-100 PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE
CAUTION RISK OF ELECTRIC SHOCK D O NOT OPEN CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
(6) Clean only with dry cloth The appliance should be cleaned only as recommended by the manufacturer. (7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered.
(15) Power source This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other source, refer to the operation instructions.
(21) Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards. (22) Safety check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
BEFORE USING THE UNIT As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture.
HANDLING RECORDS Do not touch the record's grooves. Only handle records by the edges or the lable. Make sure your hands are clean. Skin oils from even clean hands can leave a residue on the record surface that will gradually deteriorate the quality of your record. groove label edge Keep your records away from dust. Keep them in a cool, dry place. To avoid dust and scratches, keep records in their sleeves and jackets when not in use. Store records upright on their edges.
HOW TO REPLACE THE STYLUS The stylus should last about 50 hours under normal use. However, it is recommended that the stylus be replaced as soon as you notive a change in sound quality. Caution: Do not remove or bend the sylus. To avoid injury, do not touch the needle. Turn off the unit's power before you replace the stylus. Keep out of the reach of children. Handle with care, as the stylus is delicate. Use of a bent or broken stylus may damage the record and cause the turntable stylus to malfunction.
PRODUCT OVERVIEW Speaker: 1 1 2 Turntable: 3 4 5 6 7 8 5. Tone Arm Holder and Clip 6. Tone Arm 7. Turntable 8. Stylus Cartridge 1. Speaker 2. Bluetooth Indicator 3. Cue Lever 4.
PRODUCT OVERVIEW Rear View of Turntable: ON OFF DC IN 9 L LINE OUT 11 10 R PAIR 12 13 Rear View of Deputy Speaker: Rear View of Main Speaker: BT/ LINE IN 14 BT/ LINE IN LINE IN 15 ON 16 OFF 17 18 BT PHONO CHARGE 21 ON 22 OFF CHARGE DC IN DC IN 20 LINE IN 19 23 24 Top View of Main & Deputy Speaker: 25 26 VOL+ 27 VOL- 9. Power ON/OFF Switch 10. DC IN Jack 11. LINE OUT Jacks 12. PAIR Button 13. Turntable feet 14. BT/LINE IN Indicator 15. LINE IN Jack 16.
CONNECTIONS 1 Connect the Turntable through LINE OUT Jacks to the external amplifier ON OFF DC IN L LINE OUT R White PAIR Red RCA Audio Cable(not included) To the Line In/AUX In jacks on the external audio amplifier 2 Connect the Turntable through LINE OUT Jacks to the LINE IN jack of the speaker ON OFF DC IN L LINE OUT White R PAIR Red 3.
CHARGING AND CONNECTIONS Powering the Turntable: Method 1: Insert one end of the AC/DC adapter plug into the DC IN Jack of the Turntable, plug another end of the AC/DC Adapter into the AC Walloutlet. ON OFF DC IN L LINE OUT R PAIR Method 2: Insert the AC/DC Adapter plug into the DC Cable Splitter, plug one end of DC Cable Splitter into the DC IN Jack of the Turntable, then plug another end of the AC/DC Adapter into the AC Walloutlet.
LINE IN AND LINE OUT LINE IN: 1. Connect one end of the audio connection cable to the Phones jack; Line out jack or AUX out jack on the external audio player. 2. Connect the other end to the LINE IN jack of the Speaker as the illustrated below: Rear View of the Main or Deputy Speaker MP3 Mobile Phone LINE IN LINE IN (Such like MP3 Player; cell phones; iPod/iPad ... etc) Line In Cable( included) 3. Power on the speaker. 4. Plays the music on the connected external audio player as usual.
LISTENING TO A RECORD NOTE: Before operation, detach the stylus guard ( white plastic cover ) by pulling it straight off the front of the cartridge. 1. Switch on the two speakers first, wait both speaker paird with each other, the Indicator on main speaker will flash when connected. NOTE: Press the PAIR button to pair with the two speakers if connection is unsuccessful. 2.
LISTENING THROUGH BLUETOOTH OPERATION WITH TWO SPEAKERS 1. Switch on the two speakers. 2. Slide the BT/PHONO switch to BT position, the bluetooth indicator will blink, they will paird with each other automatically, the bluetooth indicator blinks on main speaker after successful connection (the bluetooth indicator will stay lit on deputy speaker). 3. Activate the bluetooth function on your external device, and try searching, the pairing name "VM-100" will appear on the pairing name list.
TROUBLESHOOTING If you experience any problems with the unit, please take a moment to look through and see if you can solve the problem yourself before calling for help. NO POWER Check the connection to AC power source. Check and make sure the AC power source is not a switched outlet and if it is, the switch is turned on. Make sure there is power to the AC outlet by plugging another item such as a lamp or fan. NO SOUND Adjust the volume.
SPECIFICATIONS Power requirement....................................................................................DC9V 2A Speaker output power..................................................................................................2X10W(RMS) Bluetooth working range..........................................................................................................32feet Turntable speed.........................................................................................................
